Free owners manual excel hustler 320
If it is not, adjust the nylock nut until the proper spring compression is achieved FIG. Refer to tire pressure information in the section of this manual. Measured from outside of hook to outside of hook with deck set at cutting height. Kohler Engine Installation. Apply grease to zerks.
[Free] Ebook Library and Manual Reference
The control levers should be adjusted so that they align vertically with each other when in the neutral position. Double check to make sure you have all fasteners tightened to the correct torque specifications. Failure to follow the safety rules and other basic More information. Now, slowly bring the lever back to the neutral position and lock it into the brake position. Place control levers in the brake position.. Never attempt to make any adjustments or repairs to the mower drive system while the engine is running. Spring length after tensioning new belt is measured from outside of hook to outside of hook.
Hustler-Turf Honda Engine Z download user guide for free - B | aptoideapk.info
As the belt stretches and wears in, adjusment may become necessary. Move the control lever to just engage the brake neutral slot and hold it in that position Do not engage the control lever far enough to engage the brakes in the brake slot FIG. Holding the cap screw in place, lock the jam nut. Shut engine off, place control levers in the park brake position, disengage deck clutch, remove ignition switch key and disconnect negative battery cable before doing any adjustments. Add this document to saved. Fill with 20W50 motor oil until oil just appears at the bottom of each transaxles top port approximately 2 qts. Item 32 Anti-scalp Wheels include Items 23—
If you lose steering control while operating the machine, place the steering control levers in the park brake position immediately. Road King models use the conventional. Whichever direction the mower turns is the slow side. Replace with new fastener. Part of wiring harness.. Use only appropriate jack stands, with a minimum weight rating of pounds to block the unit up. Assemble the drive wheels and lugnuts.